SCULTURA 4000 JULIET
|Colours||dark silver (teal)|
|Frame||SCULTURA CF2 JULIET|
|Derailleur Rear||Shimano 105, GS|
|Brake Lever||Shimano 105 R7000|
|Chainwheel||Shimano 105, 50-34 teeth|
|Hubs||VP M700F, 100x9mm width, 24 spoke holes / VP M700R, 130x9mm width, 28 spoke holes|
|Rims||MERIDA Expert SL, 17mm inner width, 22mm height|
|Freewheel||Shimano CS-R7000, 11-30 teeth, 11 speed|
|Tyres||Continental Ultra Sport II, 700x25C, fold|
|Spokes||Double Butted Black stainless|
|Handlebar Stem||MERIDA Expert CC, 31.8mm diameter, -5° stem angle|
|Handlebar||MERIDA Expert SL|
|Headset||MERIDA M2331 Neck, 2191026445|
|Seat Post||MERIDA Expert CC, 27.2mm diameter, 15mm setback, Carbon|
|Saddle||MERIDA Juliet Sport|
|Head Tube Angle||71||71||72||73|
|Seat Tube Angle||75||74.5||74||74|
|Bottom Bracket Drop||66||66||66||66|
|Head Tube Length||120||130||140||150|
|Stand Over Height||668||708||740||759|
To protect the integrity of carbon frames, the fibres are bonded together with an epoxy resin with added nano particles, increasing impact resistance by up to 40%.
When creating the individual carbon elements, an inflatable bladder is used to ensure there are no wrinkles inside the tube as these can add weight and create weakness. This results in a lighter, stiffer and stronger frame.
Carbon forks provide superb vibration damping and precise steering. All road bikes feature a full carbon fork; the steerer and fork blades are all made of carbon.
The aerodynamics are based around a NACA0028 teardrop profile (National Advisory Committee for Aeronautics) which is truncated. Air moves around the tube as though the missing rear section of the teardrop were still there, saving weight by using less material.
Using a tapered head tube with 1 1/8" bearings in the top and 1 1/4" or 1 1/2" in the bottom creates superb stiffness and precise, confidence inspiring steering.
Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.
Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.