|Colours||matt UD Carbon (grey/red)|
|Fork||Rock Shox SID RL Air 15 100 TC oneloc|
|Shock||Rock Shox Monarch RT3|
|Derailleur Rear||Shimano XT GS Shadow+|
|Shifters||Shimano XT-i / Shimano XT-I 11|
|Brake Lever||Shimano XT|
|Brakes||Shimano XT-Fin 180 cen ice / Shimano XT-Fin 160 cen ice|
|Chainwheel||Shimano: XT 36-26 boost|
|Rims||Fulcrum Red Power HP (C23) F15-R12 cen|
|Freewheel||Shimano XT 11 11-42|
|Tyres||Continental Race King Race Sport 2.2 SL|
|Handlebar Stem||MERIDA Expert OS|
|Handlebar||MERIDA Expert OS 720 flat|
|Headset||Big Conoid A-bearing|
|Seat Post||MERIDA Team carbon 31.6 SB0|
|Head Tube Angle||69|
|Seat Tube Angle||75|
|Bottom Bracket Drop||21|
|Head Tube Length||100|
|Stand Over Height||750|
The best of two worlds: externally shaped head tube with bigger diameter at the bottom and weight saving smaller diameter at the top. ‘X-Taper Headtubes’ always come with tapered forks or correct adapters fitted. Result: superb stiffness and precise steering even in the toughest conditions without increasing the weight of the frame unnecessarily.
Due to the widening of the hub spacing by 6mm, the spoke angles become flatter resulting in a stiffer and stronger wheel. In particular on 29er and 650b+ wheels, and paired with the stiffness increasing attributes of a through axle, this is hugely desirable. Besides that, the wider hubs and cranks with wider bottom brackets push the chain line further outwards and enable extra short chain stays for a more agile geometry.
Internal cable routing perfected: Up to this point, the routing of cables inside frame tubes often had the unwanted side effect that they were able to move and produce noise. Our ‘Smart Entry’ allows the cables to be clamped under tension, resulting in rattle free cables even when it is getting rough. All cable inlets are completely interchangeable to deal with any kind of set up; Di2, hydraulic hoses, brake and gear cable housings etc.
Like WorldTour pro riders, more and more technology-loving road riders trust in Shimano’s electronic Di2 shifting system, which is characterized by high reliability and efficient, effortless operability. Bikes/frames with the symbol “Di2 Ready” are optimally prepared for the installation of this technology – especially with a battery mounting possibility below the chain stay or in the seat post.
Due to a large cable exit in the down tube, “Down Tube Exit” additionally puts an end to awkward handling of internally routed cables.
“Chain Stay Post Mount Disc” – this technology is the result of three findings. First, a brake mount positioned within the frame triangle optimally protects the brake from external influences. Second, the caliper is supported by the chain stay and is therefore able to distribute the occurring physical forces in an ideal way. Third, internally routed cables can reach the brake neatly from the chain stay.
Anti Wrinkle System – Due to its technological characteristics, carbon provides designers and developers with many excellent possibilities which are not offered by other raw materials used for bike building (e. g. aluminium). The special surface structure is particularly fascinating – but what does happen inside the frame? MERIDA utilizes specific mould inserts which reduce the wrinkling considerably. Result: More stiffness and durability but less weight.
Elaborately shaped frame designs with special inlets and outlets for internally routed brake and/or shifter cables. “Clean” in a double sense: The bike looks uncluttered while the cables are protected effectively from moisture and dirt.
The friction-free alignment of the brake calliper is considerably eased by direct mounting of the post-mount calliper at the rear dropout. Adaptable to different brake disc sizes thanks to the utilization of differently dimensioned adapters.
The suspension fork and/or the shock unit of your MERIDA bike can be locked comfortably from the handlebar via remote lockout. An ideal feature especially for (racing) bikers who require super-fast switching between open and locked mode.
Carbon bikes are often subject to considerable strain. To increase the quality of the used material, MERIDA utilizes this premium technology: The carbon mats are enriched with special nanoparticles which strengthen the matrix of the epoxy resin. In this way, the impact resistance of the final component construction can be increased successfully by up to 40 %. “Nano Matrix Carbon” refines all MERIDA high-end bikes of Model Year 2014.
This is our rear suspension which we have optimized for Cross Country oriented riding and the modern world of 1x drivetrains. It is a single-pivot with linkage system, has a super light carbon rocker (only 80 grams) and allows for light, efficient rear ends whose kinematics totally eliminate pedal-bob when set up with 25% sag. Sensitive in the beginning, with a stable platform in the middle and progressive in the end – RACE LINK works masterfully in challenging uphills and downhills.