|Colours||matt titanium (black)|
|Frame||CROSSWAY DT / -L|
|Fork||Suntour NEX, Coil, 63mm suspension travel|
|Derailleur Rear||Shimano RD-M310|
|Brake Lever||Shimano ST-EF500|
|Brakes||Jake J8 disc|
|Chainwheel||Shimano TY301, 48-38-28 teeth|
|Hubs||Joytech D041DSE, 100x9mm width, 32 spoke holes, 6 bolt / Joytech D142TSE, 100x9 WHF, 32 spoke holes, 6 bolt|
|Rims||MERIDA CC, 17mm inner width,|
|Freewheel||Sunrace CSM668, 11-32 teeth, 8 speed|
|Tyres||MERIDA K1171, 700x40C, wire|
|Handlebar Stem||MERIDA TK, 25.4mm diameter, adjustable|
|Handlebar||MERIDA CC, 660mm width, 30mm rise|
|Seat Post||MERIDA TK, 27.2mm diameter, 0mm setback, 40mm seatpost suspension travel|
|Saddle||MERIDA Cross Sport|
|Head Tube Angle|
|Seat Tube Angle|
|Bottom Bracket Drop|
|Head Tube Length|
|Stand Over Height|
We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.
Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core.
‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.
‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.